8
Connecting & Removing the Acoustic Earhook
Connecting the Naída CI Q90 Acoustic Earhook
•
Remove the power source from the Naída CI Q90
Sound Processor.
•
Remove the standard Earhook already attached to the
Naída CI Q90 Sound Processor.
•
Align the Naída CI Q90 Acoustic Earhook flush with
the Naída CI Q90 Sound Processor.
•
Hold the Acoustic Earhook firmly at the top and push
towards the Sound Processor until it meets flush with
the processor.
•
Using the provided T-Mic 2 / Earhook tool, place one
of the pins in the small hole on the side of the tool.
This will help to steady the pin as you line it up with
the pin hole on the Acoustic Earhook.
•
Line up the pin with the hole in the Acoustic Earhook
and gently push it through the hole. The pin will
move from one side of the Sound Processor, through
the Acoustic Earhook, to the other side of the Sound
Processor, holding the Acoustic Earhook in place. The
pin should not come out of the other side.
•
If a small portion of the pin extends beyond the Sound
Processor, use the side of the tool to push the pin in-
wards so its lies flush with the Sound Processor.
•
Pull the tool away from the processor, leaving the pin
in place.
Removing the Naída CI Q90 Acoustic Earhook
•
Remove the power source from the Naída CI Q90
Sound Processor.
