Advance acoustic Warrior AXP, Руководство по обслуживанию, Страница: 70 / 86

68 - FORM NO. 56043103 - Warrior
™
ST, Warrior
™
AXP
ELECTRICAL SYSTEM
MAIN CONTROL PROGRAMMING OPTIONS (CONTINUED)
Restoring the scrub pressures to factory default settings:
If it is desired to restore the scrub pressures to factory default setting, perform the following steps:
1
Turn the main power key switch to the off position.
2 Press and hold the scrub on switch.
3 While holding the scrub on switch, turn the main power key switch to the on position.
4 Continue to hold the scrub on switch until the scrub off indicator turns green, then release the scrub on switch.
• On AXP™ models, the display will show pressure icon on the right top corner indicating you are in pressure restoring mode and the factory default
pressures have been restored. Now display will show key switch icon asking you to reset the machine.
• On ST models, the display will show ”d” to indicate that the factory default scrub pressures have been restored.
5 Turn the main power key switch to the off position.
Scrub deck type, chemical and recycle option selection (Warrior™ AXP):
The Warrior™ AXP can be equipped with numerous scrub deck options. This function con fi gures the control unit current settings for each of the scrub deck types.
Improper setting of the deck may result in motor damage due to overloading. Chemical option and recycle option can be selected in this mode. To select the proper
scrub deck, chemical option and recycle option:
1
Turn the main power key switch to the off position.
2 Press and hold the scrub off and scrub on switches.
3 While holding both switches, turn the main key switch to the on position.
4 Continue to hold both switches until regular scrub indicator turns yellow.
5 Release both switches. The scrub off indicator will turn red and the display will show the current scrub brush type icon and scrub deck size (disc or cylindrical,
28” or 32”). The chemical option and recycle option can be selected here while selecting the scrub deck.
6 To select chemical option, press chemical switch. Chemical indicator will turn green. To deselect chemical option, press chemical switch again. Chemical
indicator will turn off.
7 To select recycle option, press recycle switch. Recycle indicator will turn green. To deselect recycle option, press recycle switch again. Recycle indicator will
turn off.
8 The display will display current scrub deck. There are four selections that can be made. Pressing the scrub on switch will select between the four settings.
Scrub on indicator will change every time switch gets pressed.
9 Select disc icon with 28” if the machine is equipped with a 28” disc deck.
Select cylindrical icon with 28” if the machine is equipped with a 28” cylindrical deck.
Select disc icon with 32” if the machine is equipped with a 32” disc deck.
Select cylindrical icon with 32” if the machine is equipped with a 32” cylindrical deck.
10 Once the proper scrub deck size, chemical option and recycle option are selected, press the scrub off switch to save this setting.
11 The display will display key switch icon asking user to reset the machine.
12 Turn the main power key switch to the off position.
Note : It is very important to set chemical and recycle options correctly. Failure to do so could result in unusual operation of the machine.
Scrub deck type and recycle option selection (Warrior™ ST):
FACTORY DEFAULT: Dependent on machine model
The Warrior™ ST models can be equipped with numerous scrub deck options. This function con
fi gures the control unit current settings for each of the scrub deck
types. Incorrect setting of the deck type and size can result in motor damage due to overloading. The recycle option can be selected in this mode. To select the
correct scrub deck type and size, and recycle option:
1
Turn the main power key switch to the off position.
2 Press and hold the scrub system off and scrub on switches.
3 While holding both switches, turn the main key switch to the on position.
4 Continue to hold both switches until the regular scrub indicator turns yellow.
5 Release both switches. The scrub off indicator will turn red and the display will show the current deck type and size (“d” for disc, “C” for cylindrical, 28” or 32”).
Note that the scrub indicators will be green or yellow depending on the current deck type and size selected.
6 You can make any of four selections. Pressing the scrub on switch will select among the four settings. The scrub on indicators will change every time the switch
is pressed.
• Select “d28” if the machine is equipped with a 28” disc deck.
• Select “C28” if the machine is equipped with a 28” cylindrical deck.
• Select “d32” if the machine is equipped with a 32” disc deck.
• Select “C32” if the machine is equipped with a 32” cylindrical deck.
7 To select the recycle option, press the recycle switch. The recycle indicator will turn green. To deselect the recycle option, press the recycle switch again. The
recycle indicator will turn off.
8 Once the scrub deck type and size, and the recycle option have been selected, press the scrub off switch to save the settings. The scrub off indicator will turn
green.
9 Turn the main power key switch to the off position. The new settings will be saved and will remain in effect until they are changed again.
Note : It is very important to set the recycle options correctly. Failure to do so can result in unusual operation of the machine.
revised 5/08