Advance acoustic Terra 5200 B, Руководство по обслуживанию

Страница: 83 / 112

DRIVE SYSTEM
SERVICE MANUAL ENGLISH
Terra™ 5200 1463546000(1)2008-07 81
DRIVE CHAIN REPLACEMENT
CAUTION!
It is advisable to replace both chains at the same time.
Drive the machine on a level floor. 1.
Do not engage the parking brake with the pedal and the lever (25 and 18), but make sure that the machine cannot move 2.
independently.
Turn the ignition switch (17) to “0”. 3.
Open the hood (49) and fasten it with the support rod (63). 4.
On both sides of the machine, remove the screws (B), then remove the body sides (A). 5.
Release the fasteners (35 and 33), then open the right and left door (34 and 32). 6.
Slowly move the machine to set the junction links (E) of the drive chains (F) at an accessible position. 7.
Open the junction links (E) and remove the drive chains (F) from the relevant ring gears (G) and (H). 8.
Engage the parking brake with the pedal and the lever (25 and 18). 9.
Disengage and place the support rod (63) in its housing and close the hood (49). 10.
Carefully lift the hopper (31) completely (see the procedure in the User Manual). 11.
Apply a proper safety stand under the lifted hopper to prevent it from lowering incidentally. 12.
WARNING!
Apply a proper safety stand under the lifted hopper even if the hopper lifting hydraulic cylinder is equipped with
a parachute valve which prevents the hopper from lowering suddenly in case a hose breaks or leaks.
If necessary, on both sides of the machine, wipe debris and dust off the ring gears (G) and (H) with a brush and a solvent. 13.
Wipe off the solvent from the machine parts.
Install the new chains (F) by engaging them on the relevant ring gears (G) and (H), then connect them by the junction links (E). 14.
WARNING!
Do not lubricate the chains and the ring gears after cleaning/installation.
On both sides of the machine, check that the drive chains (F) are slightly loose. If necessary, adjust the tension as shown in 15.
the previous paragraph.
Assemble the components in the reverse order of disassembly. 16.
A
B
B
B
B
P100275