Advance acoustic SW5500, Инструкция по эксплуатации, Страница: 24 / 140

ENGLISH INSTRUCTIONS FOR USE
22
SW5500 - 1467284000 09/2016
MULTIFUNCTION DISPLAY SERVICE SCREENS
Main screen (E, Fig. 3)
1. Turn the ignition key (51) to the starting position “I” while
holding down push-buttons (52) and (53) to access the
main screen (E, Fig. 3).
2. Press push-button (A) to change the machine settings (see
the Machine Settings Screen paragraph).
3. Press push-button (B) to check any alarms stored by the
machine (see the Alarms Memory Screen paragraph).
4. Press push-button (C) to check the machine working hours
(see the Hour Counter Screen paragraph).
5. Press push-button (D) to exit super user mode and return
to operator mode.
E
A
B
C
D
P100897
Figure 3
Machine Settings Screen (F, Fig. 4)
This function allows you to customize the value of the
parameters described in the following table of modifiable
parameters.
1. To increase the value of the current parameter, press
push-button (C).
To decrease the value of the current parameter, press
push-button (D).
2. To move to the next parameter, press push-button (A).
3. To return to the main screen, hold down push-button (B).
F
A
B
C
D
P100898
Figure 4
TABLE OF MODIFIABLE PARAMETERS Values
Code Description Minimum Factory Setting Maximum
VSL Side broom speed 50% 100% 100%
SCF Filter shaker activation time 5 sec 20 sec 60 sec.
FVMIN Minimum forward speed 0% 25% 100%
FVMAX Maximum forward speed 10% 85% 100%
RVMAX Maximum reverse speed 10% 30% 50%
BAT Installed battery type (see table) 0 0 1
TOFF Automatic shut-off time 0 sec 300 sec 600 sec
BRGH Display contrast 5 25 50
RESET
Resets all parameters to the factory default values 0 0 1
Installed Battery type Value
WET Battery with liquid acid electrolyte 0
GEL / AGM Generic GEL or AGM batteries 1
1467284000(B)04-2018.indb 22 10/04/2018 12:19:52