Advance acoustic AXESS 5, Руководство по эксплуатации продукта

Страница: 14 / 37

When installing the reserve, always place the bridle in the reserve compartment first and then the inner container.
It is essential that the inner container closure flaps face the bottom (when in flight) of the harness. Follow the
directions indicated on the inner container and the inside of the reserve compartment. Silver dot to silver dot! The
connection to the reserve handle must be without twists.
Warning
If a reserve parachute does not fit in the inner container after repacking, it must be
refolded to the shape of the inner container.
Warning Put the bridle in first, then the reserve.
Warning Silver dot to silver dot!
4.2.4. Closing the reserve compartment
The outer container flaps are closed by loops (1) and cable (2). Outer container design supplies the necessary
tensions and pressures on the closure loops and cable.
First fold the outer container sides (3) in. The left side goes between the flaps of the right side (Labyrinth seal). The
Labyrinth closes itself using small magnets. Now carefully slide the right hand zipper from right to left, then back
to the right (4) and stow it in its zipper garage.
Next in sequence comes the zip on the left side, which closes the harness/reserve connection channel. Carefully
guide the zip puller all the way down the left side of the container – to the start of the zip track. Then return it
upwards (5) to close the channel. Finally stow this zipper in its zipper garage.
11 / 34