ATS180 - Operator Manual
ATS 180
© 2019. Advance Welding
6
This equipment is intended to weld constant voltage electrofusion fittings suitable for low,
medium and high pressure pipe work systems.
This welding unit has been designed to comply with the International Organization for
Standardization standard ISO12176-2:2000 “Plastic pipes and fittings, equipment for fusion
jointing polyethylene systems , part 2, electrofusion”.
This manual gives instructions on the correct assembly and safe use of your welding unit. It
is important that you read these instructions carefully, and keep these instructions for the
life of the unit.
This manual does not detail the specific welding procedure for the fittings: scraping,
clamping and assembly of joints. For this information you must contact the manufacturer of
the fittings.
Carefully remove the welding unit from its packaging and check that you have the following
items:
• Welding unit.
• Bar code reading scanner
• Operating Manual
• USB Memory drive
• Protective carrying bag.
When parts are missing or damaged, please contact your dealer.
Intended Use
Introduction
Delivered Items
