A - 16
CS7010 - 56091206
4/2017
INSTRUCTIONS FOR USE
A - ENGLISH
PREPARING THE MACHINE FOR USE
Read pages 15 – 20 for preparing the machine for use.
PRE-OPERATIONAL CHECKLIST
NOTE:
Refer to pages A-8 – A-12 for the reference numbers and letters called out below.
When
Action Required
Before Each Use
►
Inspect the machine for damage, oil or coolant leaks.
►
Squeeze the rubber dust cup on the Engine Air Filter
(48)
to release built-up dust.
►
Check the Air Filter Service Indicator
(29)
.
►
Check the engine coolant level
(22)
.
►
Check the engine oil level
(50)
.
►
Check the hydraulic
fl
uid level.
►
Check the Fuel Gauge
(C14)
on the diesel and petrol models.
►
Check the Fuel Gauge
located
on the LPG tank
(31)
for propane model.
►
Check the Battery Charge Level
(C3)
on battery models.
►
Make sure the battery charger is not connected to the machine.
►
Make sure the recovery tank is empty.
In the Driver’s Seat
►
Be sure that you understand the operating controls and their functions.
►
Adjust the seat to allow easy reach of all controls.
►
Turn the (Ignition) Key Switch
(A)
to the ON position. Check for proper operation of the Horn
(M)
, Hour Meter
(C1)
and Headlights
(L)
. Turn the Key Switch
(A)
to the OFF position.
►
Check the Brake Pedal
(38).
The pedal should be
fi
rm and should not go all the way down. The latch should hold
the pedal when applied.
As Needed
►
Report all defects immediately to service personnel.
Plan Your Cleaning in Advance
►
Arrange long runs with a minimum of stopping or starting.
►
Allow 6 inches (15 cm) of broom path overlap to ensure complete coverage.
►
Avoid making sharp turns, bumping into posts or scraping the side of the machine.