Advan 240-030-970, Руководство пользователя

Страница: 27 / 33

34
Guidance and Manufacturer’s Declaration--Electromagnetic Immunity
Model 240-030-970
is intended for use in the electromagnetic environment specified below.
The customer or the user of
Model 240-030-970
should ensure that it is used in such an
environment.
Immunity Test
IEC 60601 Test
Level
Compliance
Level
Electromagnetic Environment--
Guidance
Electrostatic
Discharge
(ESD)
IEC61000-4-2
6kV contact
8kV air
6kV contact
8kV air
Floors should be wood, concrete, or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30%.
Electrical fast
transient/burst
IEC61000-4-4
2kV for power
supply lines
1kV for input/
output lines
2kV line to
ground
1kV line to line
Mains power quality should be that
of a typical commercial or hospital
environment.
Surge
IEC61000-4-5
1kV differential
mode
2kV common mode
1kV differential
mode
2kV common
mode
Mains power quality should be that
of a typical commercial or hospital
environment
Voltage
dips, short
interruptions
and voltage
variations on
power supply
input lines
IEC61000-4-11
<5% Ut (>95% dip
in Ut) for 0.5 cycle
40% Ut (60% dip in
Ut) for 5 cycles
70% Ut (30% dip in
Ut) for 25 cycles
<5% Ut (>95% dip
in Ut) for 5 sec.
<5% Ut (>95%
dip in Ut) for 0.5
cycle
40% Ut (60% dip
in Ut) for 5 cycles
70% Ut (30%
dip in Ut) for 25
cycles
<5% Ut (>95%
dip in Ut) for 5
sec
Mains power quality should be that
of a typical commercial or hospital
environment. If the user of Wireless
Transmitter requires continued
operation during power mains
interruptions, it is recommended that
Wireless Transmitter be powered from
an uninterruptible power supply or a
battery.
Power
frequency
(50/60Hz)
magnetic field
IEC 61000-4-8
3.0 A/m 3.0 A/m
Power-frequency magnetic fields
should be at levels characteristic of a
typical location in a typical commercial
or hospital environment.
NOTE: Ut is the AC mains voltage prior to application of the test level.