job
Aid
1
D
ESCRIPTION
This Job Aid supports the following SFPs:
The Small Form-Factor Pluggable Active Optical Cable (MMF
SFP+ AOC) is a fully duplex serial electric/serial optical device
with both transmit and receive functions contained in a single
module that provides a high-speed serial link at 10 Gbs.
These SFP+ active optical cables are two SFP+ modules connected
with a multi-mode fiber of different lengths. Installed into appro-
priate host modules, the MMF SFP+ provides a 10 Gigabit
interface to the supporting system. The transmit side of the SFP+
converts serial non-return-to-zero (NRZ) electrical data at the 10
Gbs line rate to a standard compliant optical signal. The receive
side of the SFP+ converts the incoming DC-balanced serial NRZ
optical data at the 10 Gbs line rate into serial electrical data.
Part Number
Length
CLEI
1442400F1C
3 meters
BVPQAFAM_ _
1442400F2C
5 meters
BVPQAFBM_ _
1442400F3C
1 meter
BVPQAFEM_ _
Total Access 5000
Small Form-Factor Pluggable, 9.953–
11.3G, 850 nm Multi-mode Fiber,
Limiting, SFP+
The following features are supported on the SFP+:
■
850 nm optical signals are transmitted through the cable
■
Case temperature hardened range from 0°C to 70°C
■
Low power consumption (<1 W max)
■
Bit error rate (<1x10
-12
)
■
Excellent EMI performance
CAUTION
!
Due to compliance certification requirements, only SFP+s
supplied by ADTRAN are to be used with the host module.
ADTRAN cannot certify system integrity with other SFP+s.
Operational Specifications
■
Optical Specifications:
♦
850 nm optical signals
♦
Data rate: 9.95 to 11.3 Gbs
♦
Minimum fiber bend radius: 30 mm
■
Extended Environmental Support:
♦
Operational temperature range: 0°C to +70°C
♦
Storage temperature range: –10°C to +70°C
♦
Relative humidity to 80%, noncondensing
I
NSTALLATION
Before installing the equipment, inspect the SFP+ AOC. If damage
has occurred during shipping, file a claim with the carrier, and
then contact ADTRAN Customer Support. For more information,
refer to the warranty.
CAUTION
!
The connectors on the optical cable convert electrical signals from
the adapters’ copper connections into light that is transmitted
along fiber to the opposing ends, where the light is then
reconverted to electrical signals. Because the cable contains
optical fiber, care must be taken with regard to bend radius
tolerances (refer to the Operational Specifications section above).
Product P/N: See Below
Issue Date: July 2015
Document P/N: 61442400FxC-22B
Documentation for ADTRAN Carrier Networks products is available for
viewing and download directly from the ADTRAN Support Community
website.
Go to:
https://supportforums.adtran.com/welcome
Registration is required.
ADTRAN offers training courses on our products, including customized
training and courses taught at our facilities or at customer sites.
For inquiries, go to:
http://adtran.com/training
The following online documents and resources provide additional information for this product:
SFP/XFP/SFP+ Compatibility Matrix (online tool, go to:
http://www.adtran.com/sfp
)
