ADTRAN SR820ac, Быстрое руководство по установке

Страница: 20 / 24

20
Verifying the IP Address for Windows 10
7. On the Windows taskbar, click Start.
8. Click All Programs.
9. Click Accessories.
10. Click Run to open the Run window.
11. Type cmd and click OK to open a command prompt window.
12. Type ipconfig and press Enter to display the IP Configuration.
Renewing the IP Address for Windows 7 , Windows 8 & Windows 10
1. Press the Windows key / Windows +R key
2. Type cmd and click OK to open a command prompt window.
3. Type ipconfig/renew and press Enter. A valid IP address should appear indicating that Internet access
is available.
4. If, after performing this procedure, your computer still cannot access the Internet, call your
service provider.
Setting up a WLAN
Do the following to set up a Wi ‐ Fi network using the WPS button on the SR820ac:
1. Power on the SR820ac.
2. Power on the WPS ‐ enabled devices you want to have access to the network, such as a PC & Router.
3. The Wi ‐ Fi network will automatically detect the WPS devices.
4. Press WPS button on the SR820ac for 5 seconds until WLAN LED starts flashing.
5. If applicable, press WPS button on the other WPS devices.