SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
63
2. Fill in the fields, using the information in the following table. The same fields are used for both 2.4 GHz and 5 GHz
configurations.
3. Click the
Apply
button in the
Pending changes...
dialog box to save your settings.
Field Name
Description
Enabled
Each radio is
enabled
by default. To
disable
a radio, click the
slide button
.
TX Power
Select the maximum rate at which transmission is allowed. Options range from
15 dBm (31 mw)
to
30 dBm
(1000 mw)
. The default is
24 dBm (251 mW)
for the 2.4GHz radio and
22 dBm (158 mW)
for the 5 GHz
radio.
Bandwidth Mode
2.4 GHz radio:
Select the "high throughput" (HT) bandwidth mode for this device. Options are
HT20
and
HT40
(MHz). The default is
HT20
.
5 GHz radio:
Select the "very high throughput" (VHT) bandwidth mode for this device. Options are
VHT20
,
VHT40
, and
VHT80
. The default is
VHT80
.
Enable Legacy Rates
This feature is
disabled
by default. To set the gateway to cut transmission briefly when changing channels,
click the
slide button
. This is useful for legacy WiFi clients, enabling them to connect more effectively to a
new channel.
