20
4.
On the following page, enter a descriptive name and enter
10000
for the address (assuming a
standard configuration). Make sure that
Default Trunk Service
is the selected service.
Adding a SIP Gateway
1.
Select
Gateways
.
2.
Right-click the right panel and select
New Gateway
.
3.
Choose
Public Switched Telephone Network (PSTN)
from the gateway list.
4.
In the
Host
name field, enter the IP address of the gateway.
5.
Enter a descriptive name for the gateway.
6.
Save.
Configuring the Dial Plan
Incoming calls from the PSTN are already configured by having incoming calls routed to the 10000
Trunk identity. An entry or entries must be entered in the Dial Plan for outgoing calls to the PSTN.
1.
Go to
Communication Service > UC Server > Routing
.
2.
There are many possibilities here. If regular PSTN calls are to be routed out the gateway, add or
modify an entry where the
Original Digits
are [0-9]{7,} and select the gateway. For example: