19
25.
To complete the changes, select
Confirm/OK
and then select the
submit changes
button.
Enabling CNG Tone Detection for Faxing
By default, a Quintum gateway will not detect CNG tones used for faxing unless the call is directed at a
fax service. In order to receive faxes when a call is answered by a standard service (not a fax service), you
must create a file and upload it to the gateway via FTP.
To enable CNG detection
1.
Open notepad or another text editor.
2.
Put in the following line:
enableCNGdetection 1
3.
Save the file as
var_config.cfg
.
4.
From your Windows PC select
Start > All Programs > Accessories > Command Prompt
. The
Command Prompt
window is displayed.
5.
Use the
CD
command to change to the directory on your PC in which you saved the
var_config.cfg
file.
6.
Type
ftp
followed by the IP address of the unit. Press
Enter
.
7.
Login with the username and password. The default for both is
admin
.
8.
Use the
CD
command to change to the cfg directory (this is the directory on the Tenor into which
you will copy the
var_config.cfg
file). Depending upon the product type and software revision,
the directory structure you see in your Tenor VoIP device may be different.
9.
Type
bin <Enter>
.
10.
Type
put var_config.cfg <Enter>
11.
Restart the gateway from the
Tenor Configuration Manager
in
Tools > Reboot Tenor
.
Configuring the UC Server
After you add the gateway to your network, the UC server must be configured to handle incoming and
outgoing phone calls. For outgoing calls you must add: a SIP gateway, a dial plan entry to route calls out
through the gateway, and a toll restriction entry to allow those calls. For incoming calls you must add a
UC server identity that can answer incoming calls from the gateway. These instructions are for release 4.1
of the UC server.
Adding a Trunk Identity
1.
Go to
Identities
.
2.
Right-click the right panel and select
New Identity
.
3.
In the first page of the Wizard, select an
Attendant
identity. Make sure that the Identity is
associated with the Admin profile.
