NetVanta 6355 PoE Hardware Installation Guide
Unit Installation
61200740E1-34D
Copyright © 2011 ADTRAN, Inc.
39
Installing Network and Voice Interface Modules
NIMs/VIMs are installed into the rear panel option module slot. The following tables list the installation steps.
Also see
Figure 16 on page 39
.
Figure 16. NIM/VIM Installation
For NetVanta modules with outside plant connections, ensure that all cables are
removed from the module before installing or removing it from the NetVanta chassis.
Always remove power from the unit and all telecommunication connections prior to
removing or installing a module.
Improper installation may result in damage to the modules.
Instructions for Installing the NIMs/VIMs
Step
Action
1
Remove power from the unit.
2
Remove the cover from the option slot by pulling the pins until they disengage from the chassis.
3
Slide the option module into the option slot until the module is firmly seated against the chassis.
4
Secure the pins at both edges of the module.
5
Connect the cables to the associated device(s).
6
Restore power to the unit.
CF
SLOT 1
SLOT 2
ANALOG STA ANALOG TRK
0/1
0/2
0/1
0/2
MOH
NC NO COM
ETH 0/0
CONSOLE
DOOR
RELAY
100-250 VAC
50-60Hz
PAGE
Содержание NetVanta 6355 PoE
Страница 10: ...Table of Contents NetVanta 6355 PoE Hardware Installation Guide 10 Copyright 2013 ADTRAN Inc 61200740E1 34F ...
Страница 12: ...List of Figures NetVanta 6355 PoE Hardware Installation Guide 12 Copyright 2011 ADTRAN Inc 61200740E1 34F ...
Страница 14: ...List of Tables NetVanta 6355 PoE Hardware Installation Guide 14 Copyright 2013 ADTRAN Inc 61200740E1 34F ...