manualshive.com logo in svg

ADTRAN NetVanta 6355 PoE, Руководство по установке

Поделиться
Скачать
ADTRAN NetVanta 6355 PoE Скачать руководство пользователя страница 36

 Unit Installation

NetVanta 6355 PoE Hardware Installation Guide

 36

Copyright © 2011 ADTRAN, Inc.

61200740E1-34D

Tools Required

The customer-provided tools required for the hardware installation of the NetVanta are:

•

Ethernet cables

•

Network cables (module dependent)

•

DSX-1 cable (T1/FT1 + DSX-1 module only)

•

Phillips-head screwdriver (rack-mounted applications only)

Mounting Options

The unit may be installed in rackmount, wallmount, or tabletop configurations. The following sections provide 
step-by-step instructions for rack mounting and wall mounting.

Rack Mounting the NetVanta

The NetVanta is a 1U-high, rack-mountable unit that can be installed into a 19-inch equipment rack. The 
following steps guide you in mounting the NetVanta into a rack.

To access the CLI of the NetVanta, you will also need a PC with VT-100 terminal emulation 
software and a console port cable. Instructions on how to access the CLI are available in 
the quick start guide shipped with your unit or online on the 

ADTRAN Support Community

.

If you have purchased the VPN Accelerator Card for your NetVanta 6355 PoE, install it 
first (refer to 

Installing the NetVanta VPN Accelerator Card (included in P/N 4200368L1) 

on page 41

).

•

If installed in a closed or multi-unit rack assembly, the operating ambient temperature 
of the rack environment may be greater than room ambient temperature. Therefore, 
consideration should be given to installing the equipment in an environment compatible 
with the maximum ambient temperature specified by the manufacturer.

•

Installation of the equipment in a rack should be such that the amount of air flow 
required for safe operation of the equipment is not compromised.

•

Be careful not to compromise the stability of the equipment mounting rack when 
installing this product.

•

Consideration should be given to the connection of the equipment to the supply circuit 
and the effect that overloading the circuit might have on overcurrent protection and 
supply wiring. Appropriate consideration of equipment nameplate ratings should be 
used when addressing this concern.

•

Reliable grounding of rack-mounted equipment should be maintained. Particular 
attention should be given to supply connections other than direct connections to the 
branch circuit (e.g., use of power strips).

Содержание NetVanta 6355 PoE















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды