ADTRAN NetVanta 1235P, Руководство по установке оборудования

Страница: 33 / 42

NetVanta 1235P Hardware Installation Guide NetVanta 1131 RPS/EPS
61700595G10-34A Copyright © 2013 ADTRAN, Inc. 33
Single Rackmount
.
Figure 8. Rack Mounting the NetVanta 1131 Using the Brackets
Instructions for Rack Mounting the NetVanta 1131 (Single Mount)
Step Action
1 Securely fasten the rackmount brackets to the NetVanta 1131 using the screws provided with
the unit. The brackets can be attached in flush mount, 2-inch mount, and mid-mount positions
(see
Figure 8 ) depending on your installation requirements.
Important! To avoid damaging the unit when attaching the mounting brackets, use only the
screws supplied with the unit.
2 To allow proper grounding, scrape the paint from the rack around the mounting holes where the
unit will be positioned.
3 Position the unit in a stationary equipment rack either above or below the NetVanta switch.
4 Have an assistant hold the unit in position as you install two appropriate mounting bolts through
the unit’s brackets and into the equipment rack.
5 Proceed to the steps given in Connecting the NetVanta 1131 and the NetVanta Switch on
page 36 .
Front Mount
2-inch Mount Mid-mount