NetVanta 1000/1000R Series Hardware Installation Guide
Physical Description
61200500L1-34J
Copyright © 2006 ADTRAN, Inc.
21
3.
PHYSICAL DESCRIPTION
Front Panel RJ-45 Ports and LEDs
The NetVanta 1224
,
NetVanta 1224ST, NetVanta 1224STR, NetVanta 1224STR PWR, and
NetVanta 1224R front panels contain twenty-four 10/100BaseT Ethernet ports (RJ-45). The NetVanta
1524ST front panel contains twenty-four 10/100/1000BaseT Ethernet ports. These ports are consecutively
numbered one through twenty-four, from left to right, with the numbers screened directly above each port.
Status LEDs for each of these ports are located directly over these numbers. (See Figures 1 through 8.)
Front Panel Gigabit Ethernet Interfaces and LEDs
In addition to the Ethernet ports, the NetVanta 1224ST and 1224STR PWR front panels contain two
Gigabit Ethernet interfaces, and the NetVanta 1224STR contains one Gigabit Ethernet interface. These
interfaces are provided as SFP slots and RJ-45 jacks. Use either the SFP slots (refer to
SFP Module Slots
on page 22) or the RJ-45 jacks. These interfaces are labeled
G1
and
G2
, and their status LEDs (also labeled
G1
and
G2
) are located to the left of RJ-45 port 1, above the
STAT
LED on the NetVanta 1224ST and
1224STR. On the NetVanta 1224STR PWR, the
G1
and
G2
status LEDs are located on the right side of the
unit above the SFP slots. The NetVanta 1224R PWR, 1224ST PWR, and 1224STR PWR also have red and
green Power over Ethernet status LEDs located in the upper right and upper left corners (respectively) of
each of the Ethernet and Gigabit Ethernet (where applicable) connectors.
Other Front Panel LEDs
The
STAT
LED, which indicates the unit’s status, is located to the lower left of RJ-45 port 1. The
NetVanta 1224STR and NetVanta 1224R also contain LEDs labeled
WAN
and
DBU
. The
WAN
LED
reflects the status of an installed NIM, and the
DBU
LED reflects the status of an installed DIM. The
NetVanta 1524ST has the
STK
LED, which indicates whether the 1524 is a member of a stack. Table 1 on
page 23 describes all of these LEDs, and Appendix A shows the pinouts for the connectors.
Figure 1. NetVanta 1224 Front Panel Layout
Figure 2. NetVanta 1224ST Front Panel Layout
Figure 3. NetVanta 1224STR (AC and DC Versions) Front Panel Layout
