background image

 Unit Installation

NetVanta 1000 Series Switch Hardware Installation Guide

 34

© 2004 ADTRAN, Inc.

61200500L1-34C

5.

UNIT INSTALLATION

The instructions and guidelines provided in this section cover hardware installation topics such as 
mounting options, supplying power to the unit, and installing option cards. These instructions are 
presented as follows:

Mounting Options 

on page 35

Supplying Power to the Unit 

on page 37

Installing Dial Backup and Network Interface Modules 

on page 38

Installing the NetVanta VPN Accelerator Card (1202368L1) 

on page 40

For information on configuring a specific application, refer to the quick start documents provided on your 

ADTRAN OS Documentation CD

 or the 

Command Line Reference Guide 

(also included on your CD). 

Tools Required

The customer-provided tools required for the hardware installation of the NetVanta are:

Ethernet cables

Network cables (module-dependent)

DSX-1 cable (T1/FT1 + DSX-1 module only)

DBU cable (dial backup functions require an optional DIM)

Phillips-head screwdriver (rackmounting applications only)

To prevent electrical shock, do not install equipment in a wet location or during a 
lightning storm.

Electronic modules can be damaged by static electrical discharge. Before handling 
modules, put on an antistatic discharge wrist strap to prevent damage to electrical 
components. Place modules in antistatic packing material when transporting or storing. 
When working on modules, always place them on an approved antistatic mat that is 
electrically grounded.

To access the command line interface (CLI) of the NetVanta, you will also need a VT100 
terminal or PC with terminal emulation software and a console port cable. Instructions on 
how to access the CLI are given in the Command Reference Guide (provided on the 
ADTRAN OS Documentation CD).

Содержание NetVanta 1000 Series

















































Отзывы: