Product Specifications
DSX-1 INTERFACE
■
Interface Type: 4-wire (Tx pair and Rx pair)
■
Operating Mode: Full Duplex
■
Maximum Data Rate: 768 kbps (12 channels
x 64 kbps)
■
Line Equalization: 0-655 feet
■
Line Code: AMI, B8ZS
■
Framing: D4 ESF
■
Line Impedance: 100
Ω
CHANNEL BANK FACILITY INTERFACE
■
Fully compatible with D4 channel bank
equipment
CLOCK SOURCES
■
Derived from channel bank
DIAGNOSTICS
■
Self Test
■
Near Loopback
■
Far Loopback
ENVIRONMENT
■
Operating (standard): –40° to +70°C
■
Storage: –40° to +85°C
■
Relative Humidity: Up to 95%
non-condensing
PHYSICAL CHARACTERISTICS
■
Dimensions: 4.4" H, 1.4" W, 10" D
■
Weight: 8 ounces, nominal
■
Plugs into AT&T D4, SLC-96, or ADTRAN
ACT 1241 customer premises bank
■
Power: 5 Volts: 100µ max
■
–48 Volts: 40 mA max
■
Total Power: 2.0 W max
FACEPLATE INDICATORS
■
The FT1-TDM has four faceplate LEDs
which indicate operational status
FACEPLATE SWITCHES
■
Two DIP switches are located on the
FT1-TDM faceplate. Use these to activate
and deactivate far end loopback and near
end loopback. Use the twelve-position
rotary switch to select the number of
channels to be used.
Ordering Information
EQUIPMENT
PART #
FT1-TDM ...............................................1242052L1
Specifications subject to change without notice.
CORPORATE OFFICE
901 Explorer Boulevard
Huntsville, AL 35806
800 9ADTRAN
Local: 256 963-8000
Fax: 256 963-8699
Fax Back: 256 963-8200
http://www.adtran.com
email: [email protected]
TELCO TECHNICAL
SUPPORT
800 726-8663
REGIONAL OFFICES
Irvine, CA
800 788-5408
Denver, CO
800 471-8651
Atlanta, GA
800 332-6945
Kansas City, KS
800 471-8649
Philadelphia, PA
800 471-8656
Dallas, TX
800 471-8648
Canada
800 232-6811
ADTRAN is an ISO 9001
registered company.
Printed in U.S.A. on recycled paper
61242.052L1-8A May 1998
©ADTRAN, Inc. 1998
