manualshive.com logo in svg

ADTRAN Express L128, Руководство пользователя

Поделиться
Скачать
ADTRAN Express L128 Скачать руководство пользователя страница 65

Chapter 3: Terminal Menu Operation and Structure

48

Express L128/L128T User Manual

61202.070L1-1

IPX/Frame Type

Write security: 2; Read security: 5
The Express L128/L128T supports all four defined IPX frame types.  The pos-
sible frame types are: 

Ether Type II

 (def),

 Ether 802.3 (Raw)

,

  Ether 802.2

, or

 

Ether SNAP 

(802.2 SNAP). Only one frame type can be used at one time.

IPX/Seed Status

Write security: 2; Read security: 5
The seed status defines what the Express L128/L128T is to do with the net-
work information on the selected frame type during startup.  There are three 
possible seeding selections specified:

Seed

 - The Express L128/L128T will listen for an IPX network

number being sent by another router (including Novell software

routers residing on  servers) on the Ethernet segment connected to

this port and use this number if it exists.  If it doesn’t discover a

number in use, the Express L128/L128T will use the configured IPX

network number for the Ethernet segment.

Non-Seed

 (def) - The Express L128/L128T will listen for an IPX 

network number being sent by another router (including Novell

software routers residing on  servers) on the Ethernet segment

connected to this port and use this number if it exists.  If it doesn’t

discover a number in use, the Express L128/L128T will wait

indefinitely until a number is sent by another router on the Ethernet

segment.

Auto-Seed

 - The Express L128/L128T will listen for an IPX network

number being sent by another router (including Novell software

routers residing on  servers) on the Ethernet segment connected to

this port and use this number if it exists.  If it doesn’t discover a

number in use, the Express L128/L128T will auto-generate a valid

number using its routing tables.

IPX/RIP Timer

Write security: 3; Read security: 5
This value specifies how often the Express L128/L128T sends out IPX RIP 
packets on the network segment attached to the Ethernet port.  The RIP pack-
ets sent contain routing information about the networks for which this Express 
L128/L128T is responsible.  The default value is 60 seconds.

Содержание Express L128









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды