manualshive.com logo in svg

ADTRAN Express L128, Руководство пользователя

Поделиться
Скачать
ADTRAN Express L128 Скачать руководство пользователя страница 103

Chapter 3: Terminal Menu Operation and Structure

86

Express L128/L128T User Manual

61202.070L1-1

Traps/Manager Name

Write security: 2; Read security: 4
This is the text string describing the name of the entry.  It is intended for easy 
reference and has no bearing on the SNMP trap function.

Traps/Manager IP

Write security: 2; Read security: 4
This is the IP address of the manager that is to receive the traps.

Management/Maint Port

The Express L128/L128T has an EIA-232 connector on the back of the unit.  
The setup for that port is under this menu.

Maint Port/Password Protect

Write security: 0; Read security: 1
When set to 

No

, the maintenance port is not password protected.  When 

On

 

(def), the Express L128/L128T will prompt for a password upon startup.

Maint Port/Password

Write security: 0; Read security: 1
This is the text string that is used for comparison when password protecting 
the maintenance port.  By default, no password is entered.

The security level for the maintenance port is always set to 0.  This gives full access to 

all menus.

Maint Port/Baud Rate

Write security: 5; Read security: 5
This is the asynchronous rate that the maintenance port will run. The possible 
values are 300, 1200, 2400, 4800, 9600 (def)

, 

19200, 38400, 57600, 115200.

Maint Port/Data Bits

Write security: 5; Read security: 5
This is the asynchronous bit rate that the maintenance port will run. The pos-
sible values are 7

 

or 8 (def)

 

bits.

Содержание Express L128









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды