ADTRAN Express 5210, Руководство пользователя

Страница: 134 / 203

Chapter 12. IP Setup
12-10 Express 5210 User Manual 61200208L1-1
Ping
Use the P
ING
section of the IP S
ETUP
menu to test the connection
between the Express 5210 and another unit by sending ping
requests to a specific IP address.
Additional selections available when M
ODE
option = T
X AND
R
X
or T
X
O
NLY
Protocol Sets the version of RIP being used on this interface.
The options are V1 and V2.
Method Defines the method used to send RIP route advertise-
ments. The options are listed below:
N
ONE
: All routes in the router table are advertised
through this interface with no modification on the rout-
ing metric.
S
PLIT
H
ORIZON
: Only advertises routes not learned
through the interface.
P
OISON
R
EVERSE
: All routes are advertised, but the
routes learned through this interface are “poisoned”
with an infinite route metric.
Updates Defines when RIP advertisements are transmitted. The
options are listed below:
P
ERIODIC
: RIP advertisements are periodically trans-
mitted.
T
RIGGERED
: RIP advertisements are transmitted only
when new routes are learned, and learned routes do
not age.
Authentication When enabled, the unit requires all received RIP V2
packets to be authenticated against the configured V2
S
ECRET
. This menu is only available if P
ROTOCOL
is set
to V2.
V2 Secret Sets the global RIP V2 password. Routes are adver-
tised and installed contingent on this parameter. This
menu is only available if A
UTHENTICATION
is E
NABLED
.