ADTRAN 160 series, Руководство по установке оборудования

Страница: 22 / 28

Unit Installation NetVanta 160 Series
22 Copyright © 2013 ADTRAN, Inc. 61700416F1-34A
Mounting the AP to Drywall or Electrical Box
NetVanta APs should be positioned for maximum throughput and range between other APs and wireless client
devices. Follow these instructions to mount the NetVanta 160/161 AP on drywall or an electrical box. Follow
these instructions to mount the AP to drywall or an electrical box:
Figure 3. Plastic Mounting Bracket
Mounting the AP to Drywall or Electrical Box
Step Action
1 For the NetVanta 161 only: Install the antennas (sold separately) onto an appropriate antenna
port on the AP. The antenna ports are labeled
2.4G 1 through 3 or 5G 1 through 3 .
2 Using the thumb screws only, carefully thread the antenna onto the appropriate connector until it
is secure. Repeat Steps 1 and 2 with the each antenna.
3 Mounting to drywall: Install the four supplied drywall anchors into the wall or ceiling in the A and B
positions, using the holes in the plastic mounting bracket as a template.
4 Insert the four supplied screws through the plastic mounting bracket (in the A and B positions)
into the drywall anchors and tighten.
5 Mounting to a U.S. electrical box: Insert two of the four supplied screws through the plastic
mounting bracket (in the
B positions) into the electrical box and tighten.
6 Engaging the slots on the back of the AP with the hooks, slide the AP onto the plastic mounting
bracket until it clicks.
A
A
B
B
Hook
Hook