ADTRAN 160 series, Руководство по установке оборудования

Страница: 21 / 28

NetVanta 160 Series Unit Installation
61700416F1-34A Copyright © 2013 ADTRAN, Inc. 21
• Once APs have been installed and configured, use site survey and monitoring utilities supplied with the
client adapters to test signal strength at various locations. Modify the positioning of the APs and client
stations as required for optimum performance.
Mounting the AP on a Desktop
NetVanta APs should be positioned for maximum throughput and range between other APs and wireless client
devices. Follow these instructions to mount the AP on top of a shelf or table:
Figure 2. Attaching the Vertical Stand
Make a note of the 12-character MAC address and serial number listed on the back of the
NetVanta 160/161 before mounting the AP to a wall or other surface. This information will
be required during configuration.
Mounting the AP on a Table or Shelf
Step Action
1 Optional. For greater stability, drill holes in the table or shelf using the holes in the plastic
mounting bracket as a template. (See
Figure 2 on page 21 for a detailed view of the plastic
mounting bracket.) Insert the four supplied screws through the plastic mounting bracket into the
table or shelf.
2 For the NetVanta 161 only: Install the antennas (sold separately) onto an appropriate antenna
port on the AP. The antenna ports are labeled
2.4G 1 through 3 or 5G 1 through 3 .
3 With the top of the AP facing you (LEDs will be on your left), orient the plastic mounting bracket/
vertical stand with the hooks pointing to the right. (See
Figure 2 on page 21 for the a detailed view
of the plastic mounting bracket.)
4 Insert the hooks into the vertical stand slots on the edge of the unit (see Figure 2 ) and press firmly
until the hooks engage. You will hear a click.
5 The unit can now be set on a table or shelf.
Plastic Mounting Bracket/
Vertical Stand
Vertical Stand
Slots
LEDs