background image

iii

FCC regulations require that the following information be provided 
in this manual:

1. If this equipment causes harm to the telephone network, 

the telephone company may temporarily discontinue ser-
vice. If possible, advance notification is given; otherwise, 
notification is given as soon as possible. The telephone 
company will advise the customer of the right to file a 
complaint with the FCC.

2. The telephone company may make changes in its facili-

ties, equipment, operations, or procedures that could 
affect the proper operation of this equipment; advance 
notification and the opportunity to maintain uninter-
rupted service are given.

3. If experiencing difficulty with this equipment, please con-

tact ADTRAN (see inside back cover) for repair and war-
ranty information. The telephone company may require 
this equipment to be disconnected from the network until 
the problem is corrected or until it is certain the equip-
ment is not malfunctioning.

4. This unit contains no user serviceable parts.

To ADTRAN service personnel: For continued protection against risk 
of fire, replace F1 with the same type and rating of fuse only:  .2A, 
250V.

Содержание 1203192L1






































































































































































Отзывы: