ADTRAN 1202011L1, Руководство пользователя

Страница: 41 / 162

Chapter 4. Configuration Overview
61202011L1-1 DSU III AR User Manual 4-5
VT-100 Connection
The DSU III AR can be configured and controlled over a direct EIA-
232 connection to the Auxiliary Port located on the back of the unit.
To set up the DSU III AR for a VT-100 terminal session, the
following steps are required:
1. From the front panel set the connection baud rate. Follow the
menu below to display the appropriate configuration
parameters. Select one of the
C
ONTROL
baud rates.
2. After the baud rate is selected, a passcode prompt is displayed.
Enter the desired passcode, or press
Enter
to accept the 123
default.
3. Configure the VT-100 emulator with the appropriate baud rate,
8
DATA BITS
, N
O PARITY BITS
, 1
STOP BIT
, and N
O
F
LOW
control
(8N1). Refer to the VT-100 emulator documentation for details
on configuration.
4. Connect the VT-100 terminal to the female RS-232 connector,
labeled A
UXILIARY
P
ORT
, located on the back of the unit.
5. Press
<Enter>
on the VT-100 terminal and a passcode prompt is
displayed. Enter the passcode from step 2.
Step Action
1= DTE RATE
3= CONFIG 1= LOCAL 2= DTE OPTIONS 2= CONNECTOR TYPE
3= DATA FORMAT 1= 1.2K AT_CMD
2=REMOTE ENTER ADDRESS 4= DTE CMD OPTION 2= 75 SEC
5=TRANSMIT CLOCK 3= 150 SEC
6= CS OPTIONS 4= 300 SEC
7= ANTI-STREAM 5= 600 SEC
8= CD OPTIONS 6= 1.2K SEC
9= TR OPTIONS 7= 2.4K SEC
A= SR OPTIONS 8= OFF
B= AUXILIARY PORT 9= 300 CONTROL
A= 1.2K CONTROL
B= 2.4K CONTROL
C= 9.6K CONTROL