NetVanta 3200/3300/3400 Series
Physical Descriptions
61200860L1-34AE
Copyright © 2019 ADTRAN, Inc.
29
NetVanta 3448 Rear Panel Design
The NetVanta 3448 rear panel is shown below with a module installed.
provides
pinouts.
WAN-T1
DBU
CONSOLE
SLOT 1 NET / DBU
48 V
Figure 11. NetVanta 3448 Rear Panel Layout
NetVanta 3448 Rear Panel Interfaces
SLOT 1 NET/DBU Option Slot
The
SLOT 1 NET/DBU
option slot supports various NIM plug-in option modules. These option
modules are described in the section
PoE
The NetVanta 3448 has a 48 VDC port on the rear panel to provide the voltage required for PoE
applications. This port is active only if the NetVanta 3448 has been ordered with the PoE option. Note
that the NetVanta 3448 itself cannot be powered by this port.
8 Switch Port Interfaces
Ports 1 through 8 are RJ-45 connectors used to access the fully managed 10/100Base-T Ethernet
switch.
10/100Base-T Ethernet Interfaces
The Ethernet ports (
ETH 0/1
and
ETH 0/2
) are RJ-45 connectors.
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) that provides for local management and
configuration (via a DB-9 female connector).
Power Connection
All of the 1U-high products have universal power supplies and are shipped with the appropriate cable.
Please refer to
Supplying Power to the Unit on page 64
for connection details.
NetVanta 3450
The NetVanta 3450 is a high-performance, modular IP access router designed for cost-effective branch
office connectivity over MPLS, Frame Relay, multilink Frame Relay, PPP, MLPPP, or Ethernet networks.
Connection directly to an external modem requires a cross-over cable.