ADTRAN 1200350L1, Руководство пользователя

Страница: 75 / 134

Chapter 4: Configuration Overview
61200350L1-1 Router Option Module User Manual 4-39
RIP/Triggered
Write security: 3; Read security: 5
When set to Yes, only IP RIP updates are sent when the routing table
has changed and learned routes are not “aged.”
When set to No (def), updates are sent periodically.
PPP Profile/IPX
The IPX menu contains the parameters for exchanging IPX data
with the PPP peer.
IPX/Mode
Write security: 3; Read security: 5
When set to On (def), the connection profile to negotiate PPP IPXCP
with the PPP peer for exchanging of IPX packets.
IPX/Remote Network
Write security: 3; Read security: 5
A nonzero value in this remote network number will allow the
Router Option Module to add a route to the PPP peer’s network to
the routing table.
The Router Option Module normally will treat the WAN network as
an unnumbered link. This is usually referred to as being a “half-
router.” However, a PPP peer which wants to assign a network ad-
dress to the WAN link can do so, in which case the Router Option
Module will go into “full-router” mode.
IPX/Triggered
Write security: 3; Read security: 5
When set to Yes, only IPX RIP and SAP updates are sent when the
routing or service table has changed and learned routes are not
“aged.”
When set to No (def), updates are sent periodically based on the RIP
and SAP timers set in Configuration/IPX/RIP Timer and Configu-
ration/IPX/SAP Timer
.
IPX/Type 20 Packets
Write security: 3; Read security: 5
For certain protocol implementations, like NetBIOS, to function in
the NetWare environment, routes must allow a broadcast packet to
be propagated throughout the IPX networks.