ADTRAN 1200275L1, Руководство пользователя

Страница: 82 / 198

Chapter 6. Data Port Configuration
6-2 TSU IQ+ User Manual 61200275L1-1
PORT MAP
The P
ORT
M
AP
designates which DS0s are assigned to which port.
For example, to pass the channel’s data to a PBX, map the channel
to the
DSX-1 port. To pass data to another device (such as a router),
map the channel to the N
X
port. Set all unassigned channels to
I
DLE
.
NX PORT
Configure the P
HYSICAL
L
AYER
and F
RAME
R
ELAY
options for the
V.35 Nx56/64 port. Descriptions of the available selections follow.
Physical Layer Options (PHYS LYR OPTS)
Flow Control
This option determines how the TSU IQ+ responds to congestion
during DBU operation.
None
No flow control is used and the TSU IQ+ drops frames during
severe congestion while in DBU operation.
Hardware
The TSU IQ+ varies the DTE TC clock as necessary to relieve
congestion during DBU operation.
FECN/BECN
While in a congested state during DBU operation, frames across the
DBU PVCs have
FECN or BECN set depending on the direction.
Frames outbound to the network have FECN set, while frames
inbound to the attached DTE device have BECN set. This method
is useful if the attached DTE devices can respond to congestion
notification.
CTS Option
Set the CTS lead to F
ORCED
O
N
or F
OLLOW
RTS .
Forced On
The CTS lead is always on and the RTS lead is ignored.