ADTRAN 1200182L1, Руководство пользователя

Страница: 13 / 50

61200182L1-1 Async-232 Module User Manual 2-1
Chapter 2
Installation
UNPACK AND INSPECT
Carefully unpack and inspect the Async-232 Module for any shipping damages. If
you suspect damage has occurred, immediately file a claim with the carrier and
then contact ADTRAN Technical Support. If possible, keep the original shipping
container for returning the Async-232 Module for repair or for verification of
shipping damage.
Contents of ADTRAN Shipments
The ADTRAN Async-232 Module shipment includes the following items:
• Async-232 Module
• Async-232 Module User Manual (Insert into the main ATLAS Manual.)
• Two DB78 to Octal DB25 Cables
INSTALLING THE ASYNC-232 MODULE
The Async-232 Module plugs into any available option slot. Figure 2-1 depicts the
action required for proper placement of the Async-232 Module, as described here:
1. Remove the cover plate from the option slot into which the Async-232 Mod-
ule will be installed (located on the ATLAS chassis
rear panel).
2. Slide the Async-232 Module into the option slot until the module is firmly
positioned against the front of the ATLAS chassis.
3. Fasten the thumbscrews at both edges of the Async-232 Module.
4. Connect the DB78 end of the cable to the Async-232 Module, and connect the
DB25 connector to the associated devices.
5. Complete installation of the remaining modules and base unit, if necessary, as
specified in the Installation chapter of the ATLAS User Manual.