![ADTRAN 1200127L1 Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/adtran/1200127l1/1200127l1_user-manual_2854314016.webp)
Chapter 2. Installation
6
Dual DSU-DP User Manual
61200.128L1-1
INSTALLING THE OPTION MODULE
It is
not
necessary to turn off the power to the TSU/HSU
when installing the option module because it is
hot
swappable
. The plug-on board must be attached to a hot
swappable option module if you wish to install it while the
TSU/HSU is powered on.
Placement of the Option Module
Figure 2-1 is representative of the action required for
proper placement of the option module. Perform the
following steps to install the option module:
1.
Remove the cover plate from the TSU/HSU unit rear
panel.
2.
Slide the option module into the rear panel of the
TSU/HSU unit until it is positioned firmly against the
front of the unit.
3.. Fasten the thumbscrews at both edges of the option
module.
Figure 2-1
Installing the Option Module
Power Connection
Each option module derives power from the base TSU/
HSU unit. Power to the TSU/HSU is supplied by a captive
eight-foot power cord.
TSU/HSU
UNIT
Option Module
Cover Plate
Содержание 1200127L1
Страница 4: ...Table of Contents...
Страница 14: ...Chapter 1 Introduction 4 Dual DSU DP User Manual 61200 128L1 1...