manualshive.com logo in svg

ADTEK AFM-8A, Руководство по эксплуатации

Поделиться
Скачать
ADTEK AFM-8A Скачать руководство пользователя страница 5

1

1.1 AFM-8A series function introduction

Chapter 1. Meter overview

This is a powerful multifunction power meter
  AFM-8A series is a powerful multifunction power meter, designed by high-speed 
microprocessors and advanced signal processing technology. With three-phase power 
measurement, display, power accumulation, power quality analysis, event logging, power 
quality event logging, waveform record, TOU and network communications functions. 3.5-
inch high-de

fi

 nition color TFT-LCD display provides a variety of data display, so you can 

easily read the measurement data. User-friendly display and operation method allows 
users to easily operate without having to 

fi

 nd the manual at any time.

Perfect choice for power SCADA system
  AFM-8A series can be used as a stand alone meter, but also can be a power monitoring 
system (SCADA) of the front-end devices, through a variety of communication interface for 
remote data collection and control. The industry standard RS-485 communication interface 
and MODBUS communication protocol, as well as Ethernet and MODBUS TCP / IP  
protocol makes the network easy and convenient, is the perfect choice for SCADA system 
integration.

Energy management
  AFM-8A series can calculate bidirectional and four-quadrant active power and reactive 
power accumulation, as well as the maximum / minimum value of the parameters and 
demand calculation function, with the system software can help users to measurement the 
energy consumption of each circuit loop and load trends.

Remote control
  AFM-8A series is not only a measurement meter, in addition to includ DI, relay output 
and AO interface, also can via second RS-485 port to connect expansion DIO modules, to 
achieve 

fl

 exible I / O function, become a powerful discrete RTU system.

Analysis of power quality
  AFM-8A series using digital signal processing technology, it can real-time measurement 
the phase voltage and current total harmonic distortion (THD), individual harmonic (2-63rd),   
voltage and current unbalance.

Data logging function
  The AFM-8A series provides 4MB 

fl

 ash RAM for data storage, it's recording the speci

fi

 ed 

parameters on a regular time. Internal with high-precision real-time clock, each record with 
a timestamp.

Time of use function(TOU)
  The AFM-8A series has a powerful TOU function and up to 5 years of holiday setting 
function. The user can be based on the local TOU price to settings for achieve energy 
cumulative calculation.

Содержание AFM-8A






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды