Note: holes in the current holes between the previous holes and increase
the number of holes required.
复制
Copy
：If you need to process more than two on a platform of products,
could take the data from the first product taught well, and then uses copy
function, generate a second product data, do the following:
1, according to the normal method was taught first product data.
2, moved to the second product of the first hole.
3, press the copy button, start number input 1.
4, end, enter first number the last number.
5 to complete.
Above is a copy of the entire product, flexible use, can also be used in
other situations.
平移
Translation
：If the data was copied from another controller, you
generally need to modify the data, one approach is to directly modify the
starting point, but when the offset is not convenient, the other method
is to use the translation feature, specific methods are as follows:
First, back to the starting point, and then entered the teaching picture,
press the hole key, move to the first hole, position and the actual
position at this time is different, press the move key, move the head to
the actual first hole location, and then press the SHIFT-key, enter the
last hole number, this number is one less than the total number of holes,
press OK.
Translation of the above for all data, can also be used for data
translation, as long as the first position to the beginning of the
translation slot on this, do not enter the final holes, and input the
finishing hole.
下页
Down page
：
To check down page data
上页
Up page
：
To check up page data
保存
Save
：Used to manually save the currently teaches data. When the
parameters in the "010, taught whether data is automatically saved. "Open
systems will automatically save modified data in real time, without the
need for manual saving.
1.2.3.2
PATTERN FEATURES
