Q2BYG403MD Driver User’s Manual
-2-
Chapter I. Safety Notice
To avoid personal injury and property damage, please read the following
safety information carefully before testing and using the Driver. Please
strictly follow the safety measures below:
¾
Please read the User’s Manual carefully, and follow the safety rules
strictly.
¾
If the input voltage of Q2BYG403MD is higher than 36V, please
check whether voltage of the Driver terminal is in safe range with a
multimeter after the power is cut off, and then connect the wire or
check, or else it may cause electric shock.
¾
Do not connect the wires or insert/remove the terminal when the
Driver and motor are working, or else it may cause electric shock.
¾
Do not open the shell of the Driver after the power supply is
connected or when the Driver is running, or else it may cause
electric shock.
¾
To avoid personal injury or property damage, please ask qualified
personnel to operate the Driver.
¾
Please follow the technical specification and electrical installation
standard during the installation. The Driver must be grounded
properly, and the cross-sectional area of the grounding cable should
be at least 1.25mm
2
.
¾
Do not put any object in the Driver, or else it may damage the
Driver.
¾
If the Driver has any failure, please send it to the maintenance
center. Disassembling the Driver without authorization or improper
operation may damage the Driver. It will violate the warranty if the
user opens the Driver shell without authorization.
¾
To dispose of the Driver, please follow local regulations on
industrial waste disposal to avoid environment pollution.
※
Statement:
If this Driver is applied to the machinery and equipment
directly related to personal safety (nuclear power control,
medical equipment, truck, train, aircraft, entertainment and
security equipment), it is required to install protection
equipment to avoid personal injury.
Electronic equipment isn’t permanently reliable. The equipment
must have sufficient safety measure, in order to protect the
safety of personnel and equipment in case of Driver failure. The
customer shall assume the losses due to machine failure or