approximately 3.0%.
Rate Priority The Rate Priority control allows the
operator to designate which rate will
be kept constant. When the Symbol
Rate is entered and Rate Priority is
Symbol, the symbol rate is held
constant and the Interface rate is
calculated. When the Interface Rate is
entered and Rate Priority is Interface,
the interface rate is held constant and
the symbol rate is calculated.
Symbol
Interface
Symbol Rate The number of symbols transmitted
per second. The amount of data per
symbol is dependant upon the
modulation type, e.g. QPSK, 8PSK,
etc.
Range can be determined by
feature key.
Interface
Rate
The Interface Rate is the bit rate at
the baseband interface.
Range can be determined by
feature key.
Carrier Mode The Carrier Mode control allows the
operator to select ON for normal
operations or select one of four
unmodulated carriers. The Pure
Carrier option will provide an
un-modulated output carrier at the
desired frequency and output power.
Other Carrier Mode options include
Clock 4/8/16.
Pure Carrier
On
Clock/8
Clock/4
Clock/16
10MHz Clock Allows operator to generate or pass a
10MHz signal. The signal can be
generated internally or sourced
externally.
*** This is a special order option. If
your unit does not have the
functionality the setting will read
“N/A”
OFF
ON
EXTERNAL
10 MHz
Clock
Combined
Allows the operator to choose whether
or not to combine the 10MHz signal
with the L-Band output.
*** This is a special order option. If
your unit does not have the
functionality the setting will read
“N/A”
UNCOMBINED
COMBINED
