Safewatch Pro 3000 System Manual
https://alpha.adt.com/help/63[11/12/2018 9:41:21 PM]
Multiple partition arming/disarming
Up to four programmable pagers
System scheduling
The Safetwatch Pro 3000 is designed to be as maintenance free as possible, however we suggest that you
still test your system once a month and after any alarm occurrences.
Treat the system as you would any other electrical equipment; do not slam protected doors or windows,
keep dust from accumulating on the touchpad and sensors, and do not spray water or any liquid on the
units.
*Your system may or may not be set up for fire protection.
System Keywords
Keyword
Meaning
Alarm
An alarm has been detected in the armed system. See zone area number(s) to identify
location of triggered alarm.
Away
All burglary zones, interior and perimeter, are armed.
Instant
Perimeter burglary zones are armed and entry delay is turned off.
Stay
Perimeter burglary zones, such as protected windows and doors, are armed.
Fire
Appears when a fire alarm or fire fault is present. Accompanied by a display of the zone
in alarm.
Bat
Low battery condition in a wireless sensor if zone number is displayed or low system
battery if no zone number is displayed.
Chime
Appears when the Chime feature is activated.
Bypass
Arming the system with protected areas intentionally left open.
Check
A malfunction has occurred. See area zone number to identify location of trouble event.
No AC
AC power has been cut off and the system is running on backup battery.
Not Ready
System not ready for arming. READY indicates the system is ready.
Arm & Disarm the System
When arming your system it is important to note that:
Before arming your system, all protected areas must be closed. Use the READY/[*] key to display
any faulted (i.e., open) zones. The system will display READY when the system is ready to be armed.
Codes and commands must be within of 10 seconds of each other. If more than 10 seconds elapse
between entries, the entry will be aborted and must be re-entered.
