Hybrid Standalone NVR User Guide
a.
Left mouse-click and drag it to set the desired region. If the area is already blue (armed),
dragging the mouse sets the cells clear (disarmed). If the area is already clear (disarmed),
dragging the mouse sets the cells armed (blue).
or
b.
Press the
Fn
button on the front panel to switch between the armed mode and disarmed
modes. Use the arrow keys to apply that format to the grid cell.
6.
After setting the zone, exit and return to the Detect zone setup screen, using one of the
following methods:
a.
Right mouse-click
or
b.
Press the
Enter
button on the front panel
7.
Set the
Sensitivity
level 1-6, where 6 is the most sensitive. The default is 3.
8.
Select the
Test
button. A screen appears as in Figure 3-31. The system only displays the
motion detect status of the blue area. The red flashing area shows motion has been detected
in this area.
Figure 3-31
9.
In the
Period
area, select the
Setup
button. The Setup dialog opens for setting the motion
detection period.
NVR7400 Series User Guide
73
Содержание NVR7400 Series
Страница 1: ...ADT NVR7400 Series Network Video Recorder User Guide...
Страница 17: ...2 Getting Started 1 3 4 Network Connections Figure 1 5 NVR7400 Series User Guide 7...
Страница 50: ...Hybrid Standalone NVR User Guide 3 Local Menu Operations NVR7400 Series User Guide 40...
Страница 137: ...Hybrid Standalone NVR User Guide 3 Local Menu Operations Figure 3 90 NVR7400 Series User Guide 127...
