Hybrid Standalone NVR User Guide
Figure 3-28
2.
Highlight the box (
) to select the corresponding function.
3.
After completing the setup, click the
Save
button.
The following describes the Video Detect window:
Event type
Select the desired event from the appropriate tab: Motion Detection, Tampering or Video Loss.
Channel
Select a channel from the dropdown list that you want to enable for the event.
Enable
Check the box to enable the event type.
Region
(Motion Detection only) Click the
Setup
button to set Motion Detection zone. There are
396(PAL)/330(NTSC) small zones. The blue zone is the motion detection zone; the white zone is the
disarmed zone. The system can only detect motion detect signal from the armed region. See section
Motion Detection
on page 71.)
NVR7400 Series User Guide
69
Содержание NVR7400 Series
Страница 1: ...ADT NVR7400 Series Network Video Recorder User Guide...
Страница 17: ...2 Getting Started 1 3 4 Network Connections Figure 1 5 NVR7400 Series User Guide 7...
Страница 50: ...Hybrid Standalone NVR User Guide 3 Local Menu Operations NVR7400 Series User Guide 40...
Страница 137: ...Hybrid Standalone NVR User Guide 3 Local Menu Operations Figure 3 90 NVR7400 Series User Guide 127...
