ADT MDC845 FHD Wi-Fi Mini Dome Camera
Quick Installation Guide
MDC845 FHD Wi-Fi Mini Dome Camera Installation Guide
7
Caution: To avoid damaging the camera, be sure to observe proper
polarity. Although the + and – terminals are marked on the power
adapter, they are white on white and may be difficult to see.
2.3
Final Steps
•
Check LED status
-
The LED lights up solid blue and then blinks ten times during
startup, which takes about 30 seconds. After startup is completed,
and prior to enrollment, the power LED blinks green/amber.
•
Network connections
-
If you are using a wired connection to the MDC845, prior to
powering up, connect a standard Ethernet cable (not included)
from the LAN port of the camera cable to either the device LAN
port on the Pulse Gateway or directly to the customer’s router for
Control.
-
If you are using a wireless connection to the MDC845, this step is
performed during enrollment.
