Reset
To silence an alarm and to clear memory of an alarm event, enter the [security code] + [1] sequence twice.
Security Codes
Your system will allow different security codes for use by other users, however only the Master user or
Partition Programmer can assign user codes to users.
Users are also assigned an Authority Level, which defines the functions a particular user can and cannot
perform.
To add a user code, enter your [Master/Partition Programmer code] + [8] + [user number] + [new
user’s code].
To delete a user code, enter your [Master/Part. Prog code] + [8] + [user number] + [#] + [0].
To assign an authority level, enter your [Master/Part. Prog code] + [8] + [user number] + [#] + [1] +
[authority level].
Some user authority levels have been pre-programmed:
User Authority Level
Explanation
Code to assign to user
Standard
Can only perform security
function in assigned
partitions.
[0]
Arm Only
Can only arm the system.
[1]
Guest
Can arm the system in
assigned partitions, but
cannot disarm the system
unless the system was armed
with this code. Perfect for
babysitters, cleaners, etc.
[2]
Duress
Intended for use for when
you are forced to arm or
disarm the system against
your will.
[3]
Partition Programmer
Can do everything a Standard
user can do plus assigning
[4]
