Patent No. US 8,856,780 CA 2759622
01
02
03
04
ENGINE
START
STOP
STOP ACC
ON START
ON
05
06
ENGINE
START
STOP
STOP ACC
ON START
STOP
07
08
09
10
11
ENGINE
START
STOP
STOP ACC
ON START
ON
12
13
ENGINE
START
STOP
STOP ACC
ON START
STOP
14
15
16
ENGINE
START
STOP
STOP ACC
ON START
START
17
MODULE PROGRAMMING PROCEDURE - 1 OF 1
When programming, only one keyfob will be
used. Place the other one at least 10 feet away
from the vehicle.
Remove battery from keyfob. Place key fob on
key reader in armrest or center console.
Close driver door. Re-open driver door to wake
up data bus.
Push start button twice [2x] (or press start
button 5 seconds) to ON position.
Wait, LED will turn solid RED.
Push start button once [1x] to OFF position.
Wait, LED will flash GREEN rapidly.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
Connect power fi rst. Connect module to
vehicle.
Push start button twice [2x] to ON position (or
press start button 5 seconds to ON position).
Wait, LED will turn solid GREEN for 2 seconds.
Push start button once [1x] to OFF position.
Remove key fob from key reader. Insert battery
in keyfob .
If the vehicle is equipped with a power liftgate:
Open and close the power liftgate with the
OEM keyfob.
START vehicle for 30 seconds.
Module Programming Procedure completed.
www.flashlogic.com
Automotive Data Solutions Inc. © 2022
OEM-AL(RS)-GM8-[FLCAN]-EN
PAGE 26 OF 34
• 20220310
DOC.: #79441