YOU MUST READ THIS ENTIRE MANUAL BEFORE YOU LEAVE TODAY!!!
ANY SERVICE INQUIRIES SHOULD BE MADE TO ADS @ 888-786-7384
Keeping Americas Highways safe for All!
Alcohol Detection Systems
Determinator
User’s Manual
Rev 9
– Released – 6/1/2018
www.stopdwi.com
888-STOP-DUI
NOTE: Completely read and understand this manual before operating a vehicle with the Determinator System installed.
A user must comply with the requests of the unit and follow its instructions in a timely manner.
Failure to do so may require early service or a complete vehicle lockout
– at the driver’s expense and inconvenience. Always
operate the vehicle and provide breath samples in a safe manner.
1. ADS Determinator System Overview
Alcohol Detections Systems’
Determinator
is a breath alcohol ignition interlock device (BAIID) designed to prevent
a driver from starting a vehicle when his breath alcohol content (BRAC) is above a defined set point. It is certified
per NHTSA (National Highway Traffic Safety Administration) specifications as published in Federal Register May 8
th
, 2013.
Additionally, the device has been certified and approved for use in the State of Arizona.
2. System Components
2.1. Determinator Hand Held
The
Hand Held
is the removable portion of the
Determinator
system into which a user provides a breath sample. Display messages and voice
prompts are provided by the
Hand Held
to instruct a user
.
2.2. Determinator Remote Camera
This is the
camera
used to capture images of the driver at various points once the
Determinator
is activated, and at various points while the
vehicle is running. Movement, or obstruction of this component is a violation of Arizona State Law, and will be detected electronically by the
device and when the Arizona DOT reviews the images. Penalties may include but are not limited to extension of your interlock requirement,
furthermore it may prevent your vehicle from being authorized to start.
2.3. Determinator Vehicle Module
The
Vehicle Module
is wired to the vehicle’s electrical system. It is out of sight of the user and provides the connection to the vehicle. The cord is
permanently attached to the
Vehicle Module and is used to attach the handheld unit.
2.4. Determinator Kit - Mouthpieces
Along with
Hand Held
,
Vehicle Module
, and wiring harness, the
Determinator
Kit includes 2 disposable Mouthpieces, extra mouthpieces are
available by contacting Alcohol Detection Systems at
888-786-7384
Mouthpieces should be changed or cleaned
at a user’s discretion or for a
change of user. Always keep a spare handy.
.
3. Operation
3.1. Plug In
Plug the Hand Held Unit into the Cable. The connector is keyed and will only plug in with the connector
writing
“up”. To remove, squeeze the both sides of the connector and gently pull.
3.2. Turn On
Turn the ignition to “RUN” - this is the position just before “CRANK”. The Hand-Held will turn on and prompt the
user for the next step.
3.2.1. Turn On Messages
•
Hand Held
firmware version number
•
Hand Held
serial number
•
Initializing Message
•
Possible Service Due Messages
Pay attention to the service due or lockout date. If you are parking your vehicle for an extended period of