Touch screen troubleshoo;ng and calibra;on
•
Disconnect the USB cable between cabinet and screen, connect the keyboard.
Press the letter Q, this should quit the game and fall back to the windows
desktop. Disconnect the keyboard and connect the mouse. Double click on the
Multitouch icon
.
•
If window title screen says ‘device disconnected’
o
Check DC molex connec2on between cabinet and monitor. With a volt meter check if
you have 5V on red and black wire coming from cabinet. If not check DC power supply
accessible from the coin door located in the center of the cabinet.
o
If 5V is ok, Remove monitor bezel and computer boOom cover (see chapter 6) and check
USB connec2on between computer and touch screen. Also check if round barrel
connec2on is ok for DC power to touch screen
.
•
If window title screen says “device connected”
o
Click on calibration then follow the onscreen instructions. If touchscreen does not
respond as expected during calibration go to next step
o
Click on advanced, OK, then ‘Reset TouchData’. It will ask you to wait 10 seconds
then click on yes. When done retry calibration.
12