TFX1 - Fruit Ninja FX 2 Manual V1.0
Chapter 06 – Service & Repair
15
Using the arrows, scroll down to the Restore on AC/Power Loss
option and press the “Enter” key.
Using the arrows, select the Power On option and press the “Enter”
key.
Press the “F10” key then the “Enter” key to exit the Bios screen.
Unplug the keyboard and put the bottom cover back on.
Picture Shutters, Freezes
Momentarily
The best way to verify the cause is to try and disconnect both USB
cables from the computer itself and restart the unit. If the shuttering
is still present then the hard drive is usually the cause of this issue.
If the shuttering went away just plug back the USB cables one at a
time and restart the computer every single time. This will eventually
point you into the right direction. Sometimes the USB cables get
pulled or squeezed, this causes a power surge back to the computer
thus the shuttering issue. Bypassing the USB cable using another one
to test your issue will tell you which one to replace.
Monitor Troubleshooting
Identifying
your Monitor
First, identify your monitor model. Check the back of the monitor’s
casing.
If there’s a label in the lower-left corner or in the lower right corner,
you have a TFT monitor (See Fig 3).
Fig.3
