ADOR Croco, Руководство по эксплуатации

Страница: 6 / 18

4 DRIVE FUNCTIONS, DESCRIPTION OF OPERATION
OPENING AND cLOSING ThE DOOR
Press the control button for ~0.5 sec. the door will start moving after you re-
lease the button.
AUTOMATIc ROLL-BAck
if the door pushes against an obstacle while it is closing, it will stop automati-
cally and roll back.
STOPPING ThE DOOR
Press the control button one time to stop the door while it is moving.
ADjUSTMENT Of ThE wIDTh Of DOOR OPENING
open the door. move it to the required position by hand. Press the control but-
ton for ~10 sec. until you hear 2-times sound signal. release the button. now
the drive will automatically remember the adjusted width of the opening.
SLIDING DOOR fIxING
the drive can operate in 2 modes:
with fixing (factory settings) picture 4).
without fixing (picture 3).
to change the mode to operating without fixing press the control button for
~15 sec. until you hear 3 long sound signals. release the button.

NOTE

Operating mode without fixing is used if there is a lock drive. Emer-
gency opening of the door from the outside is possible in this operat-
ing mode.
RETURN TO fAcTORy SETTINGS
Press the control button for ~20 sec. until you hear 4-times sound signal. re-
lease the control button. all drive settings will return to factory settings.

NOTE

The drive settings will automatically return to factory settings in
case of power outage.