manualshive.com logo in svg

Adobe 22011292 - Audition - PC, Инструкция по использованию

Поделиться
Скачать
Adobe 22011292 - Audition - PC Скачать руководство пользователя страница 37

33

USING ADOBE AUDITION

Importing, recording, and playing audio

Last updated 2/16/2012

If amplitude is too low, sound quality is reduced; if amplitude is too high, clipping occurs and produces distortion. The 
red clip-indicator to the right of the meters lights up when levels exceed the maximum of 0 dB.

To clear clip indicators, either click them individually, or right-click the meters and choose Reset Indicators. 

Customize level meters

Right-click the meters and select any of the following options:

Meter Input Signal 

In the Waveform Editor, displays the level of the default hardware input. (See “

Configure audio 

inputs and outputs

” on page  18.) To quickly enable or disable this option, double-click the meters.

Range options 

Change the displayed decibel range.

Show Valleys 

Shows valley indicators at low-amplitude points.

If valley indicators are close to peak indicators, dynamic range (the difference between the quietest and loudest 
sounds) is low. If the indicators are spread far apart, dynamic range is high. 

Show Color Gradient 

Gradually transitions the meters from green, to yellow, to red. Deselect this option to display 

abrupt color shifts to yellow at -18 dBFS, and red at -6.

Show LED Meters 

Displays a separate bar for each whole decibel level.

Dynamic or Static Peaks 

Change the mode of peak indicators. Dynamic Peaks resets the yellow peak level indicators 

to a new peak level after 1.5 seconds, letting you easily see recent peak amplitude. As the audio gets quieter, the peak 
indicators recede. Static Peaks retains peak indicators, letting you determine the maximum amplitude of the signal 
since monitoring, playback, or recording began. However, you can manually reset peak indicators by clicking clip 
indicators.

To find out how loud audio will get before you record it, choose Static Peaks. Then monitor input levels; the peak 
indicators show the level of the loudest part.

Adjust recording levels for standard sound cards

Adjust levels if recordings are too quiet (causing unwanted noise) or too loud (causing distortion). To get the best 
sounding results, record audio as loud as possible without clipping. When setting recording levels, watch the meters, 
and try to keep the loudest peaks in the yellow range below -3

  dB

Adobe Audition doesn’t directly control a sound card’s recording levels. For a professional sound card, you adjust 
these levels with the mixer application provided with the card (see the card’s documentation for instructions). For a 
standard sound card, you use the mixer provided by Windows or Mac

  OS.

Adjust sound card levels in Windows 7 and Vista

1

Right-click the speaker icon in the taskbar, and choose Recording Devices.

2

Double-click the input source you want to use. 

3

Click the Levels tab, and adjust the slider as needed.

Adjust sound card levels in Windows XP

1

Double-click the speaker icon in the taskbar.

2

Choose Options  > Properties. 

3

Select Recording, and then click OK. 

Содержание 22011292 - Audition - PC




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды