Admiral RISER RECLINER, Руководство пользователя

Страница: 11 / 20

10
6.3 MOVING YOUR CHAIR
It may be necessary to move your chair in order to install it in the correct place. If so, proceed as
follows:

Ensure that it is switched off at the mains socket.

Unplug the lead from the transformer to the chair and neatly coil the cable. Place the cable
either in the side pocket or on the seat of the chair to ensure it does not become entrapped
and damaged in transit.

If the chair is moved the plug must always be removed from the socket and the slack in the
cables taken up so that there are no trailing wires.

If necessary you can remove the backrest.

The chair is now ready to move.
7.0 OPERATION – DUTY CYCLE / SAFETY CUT-OUT

The motors within the chair are not designed for continuous operation. They should only be used
for 10% of the time (for example: 2 minutes every 20).

In the event that the motors overheat, or the power limit of the motors is exceeded, a safety
device will cut out the power to the motors and disable the chair’s activities. After
approximately 20 minutes the chair should re-start.