IM 1E10D0-01E
5-1
5. OUTLINE
5.
OUTLINE
■
STANDARD SPECIFICATIONS
Protection: IP67, NEMA 4X, JIS C0920 water tight type
Size in mm (inch):
15 (0.5), 25 (1), 40 (1.5), 50 (2), 80 (3), 100 (4),
150 (6), 200 (8), 250 (10), 300 (12), 350 (14), 400 (16)
Coating:
Terminal Box:
Polyurethane corrosion-resistant coating,
Deep sea moss green (Munsell 0.6Y3.1/2.0)
• Terminal box is coated for all type
Body:
Polyurethane corrosion-resistant coating,
Deep sea moss green (Munsell 0.6Y3.1/2.0)
• All sizes of carbon steel flange type
• 150 and 200 mm of wafer type
No coating
• 15 to 100mm of stainless steel flange type
• 15 to 100mm of wafer type
Flow Tube Material:
Size 15 to 100mm (0.5 to 4 in.)
Housing : Stainless steel
(15mm:SCS11, 25 to100mm:SUS304)
Mini-flange for wafer conn. : Stainless steel
(SUS430)
Flange : Carbon steel (SS400) or stainless steel
(SUS304)
Pipe :
Stainless steel
(15 to 25mm:SCS13, 40 to 100mm:
SUS304)
Terminal box : Aluminum alloy
Size 150 to 400mm (6 to 16 in.)
Housing : Carbon steel (SS400)
Mini-flange for wafer conn. : Carbon steel
(SS400)
Flange : Carbon steel (SS400) or stainless steel
(SUS304)
Pipe :
Stainless steel (SUS304)
Terminal box : Aluminum alloy
Wetted Part Material :
Lining :
Fluorocarbon PFA
Elecctrode : Stainless steel (SUS316L), Hastelloy
C (equivalent to Hastelloy C-276)
Titanium, Tantalum, Platinum-Iridium,
Tungsten Carbide.
Earth Ring : • Size 15 to 200mm
Stainless steel (SUS316), Hastelloy C
(equivalent to Hastelloy C-276),
Titanium, PFA Earth
electrode*.
*Earth Electrode: Tantalum,
Platinum-Iridium.
•
Size 250, 300mm
Stainless steel(SUS316), Hastelloy C
(equivalent to Hastelloy C-276),
Titanium
•
Size 350, 400mm
Stainless steel (SUS316)
Note : Hastelloy is a registered trademark of Haynes
International Inc.
Gasket :
• VALQUA#4010 ; Fluoro rubber, viton (between
flow tube body and earth ring; for optional
code/FRG)
• Non-asbestos joint sheet sheathed with fluoro
resin PTFE (between earth ring and process
flange; for optional code /BSF)
* Other gaskets between flow tube and earth ring;
• VALQUA#4010(Mixing#RCD970) ; Alkari
resistance gasket for PVC piping(Fluoro
rubber)
• VALQUA#4010(Mixing#RCD470) ; Acid
resistance gasket for PVC piping(Fluoro
rubber)
Contact YOKOGAWA office. (Refer to TI 1E6A0-06E)
Electrode Construction: External insertion type.
Electrical Connection:
ANSI 1/2NPT female, DIN Pg13.5 female,
ISO M20 X 1.5 female, JIS G1/2 female.
■
STANDARD pERFORMANCE
Accuracy :
Size in mm
(inch)
Span in m/s
(ft/s)
Accuracy
15 to 400
(0.5 to 16)
T01.EPS
0.25% of span
(at indications below 50% of span)
0.5% of rate
(at indications 50% of span or more)
0.5% of span
0.3 to 1
(1 to 3)
1 to 10
(3 to 33)
Repeatability: 0.1% of flowrate(minimum 1mm/s)
Maximum Power Consumption: 11W (incl.converter)
Insulation Resistance:
• 100MW between excitation terminal(EX1) and
signal terminals(A, B and C) at 500V DC.
• 100MW between common terminal(C) and signal
terminals(A and B) at 500V DC.
• 100MW between signal terminal (A) and signal
terminal(B) at 500V DC.
Withstand Voltage:
• 1000V AC between excitation terminals (EX1 and
EX2) and ground terminal(G) for 1 minute.
• 500V AC between signal terminals(A and B) and
ground terminal(G) for 1 minute.(for /KF2, /FF1)
• 2000V AC between signal terminals(A and B) and
excitation terminals(EX1 and EX2) for 1 minute.
(for /KF2, /FF1)
CAUTION
When performing the Voltage Breakdown Test,
Insulation Resistance Test or any unpowered
electrical test, wait 10 seconds after the power
supply is turned off before removing the hous-
ing cover. Be sure to remove the Short Bar at
terminal “G”. After testing, return the Short Bar
to its correct position. Screw tightening torque
should be 1.18N-m(0.88ft-lb)or more, because
the G-terminal is thought as a protective
grounding and should conform to the Safety
Requirements.
