LEC-EL Product specification
SGET SMARC Rev 2.1
Page 1
copyright © 2021 ADLINK Technology Inc.
USB3+
USB3-
S68
S69
USB differential data pairs for
port 3
I/O
USB
USB
Standby
US
USB3_SSRX-
S65
S66
Receive signal differential
pairs for SuperSpeed on port 3
I
USB SS
USB SS
Standby
Coupling caps for RX pairs are on the USB Device
US
USB3_SSTX-
S62
S63
Transmit signal differential
pairs for SuperSpeed on port 3
O
USB SS
USB SS
Standby
Coupling caps for TX pairs are on the Module
USB3_EN_OC#
P74
USB over-current sense for
port 3
I/O OD
CMOS
3.3Vsb /
3.3V
Standby PU 10k Pulled low by Module OD driver to disable USB0
power. Pulled low by Carrier OD driver to indicate
over-current situation.
USB3_VBUS_DET S37
USB port 3 host power
detection, when this port is
used as a device.
I
USB VBUS
5V
USB VBUS
5V
Standby
USB3_OTG_ID
S104 Input pin to announce OTG
device insertion on USB 3.0
port
I
CMOS
3.3Vsb /
3.3V
Standby
USB4+
USB4-
S35
S36
USB differential data pairs for
port 4
I/O
USB
USB
Standby
USB4_EN_OC#
P76
USB over-current sense for
port 4
I/O OD
CMOS
3.3Vsb /
3.3V
Standby PU 10k Pulled low by Module OD driver to disable USB0
power. Pulled low by Carrier OD driver to indicate
over-current situation.
USB5+
USB5-
S59
S60
USB differential data pairs for
port 5
I/O
USB
USB
Standby
USB5_EN_OC#
S55
USB over-current sense for
port 5
I/O OD
CMOS
3.3Vsb /
3.3V
Standby PU 10k Pulled low by Module OD driver to disable USB0
power. Pulled low by Carrier OD driver to indicate
over-current situation.
Note
: All USB connected straight from SoC , no support for OTG
Содержание SMARC MODULE LEC-EL
Страница 1: ...LEC EL L 11 08 2021...
Страница 16: ......