ADLINK Technology ROScube-Pico NPN Series, Руководство пользователя, Страница: 35 / 37

Getting Started
29
4 Getting Started
4.1 Connect the DC plug adapter cable
Locate the DC plug adapter cable, included in the accessory box (shown below). Insert to the DC output wires of
the AC adapter into the terminal block P1 as indicated: negative (black) to “-“ and positive (red) to “+”.
Insert the DC plug P2 into the DC power input jack on the front panel (see Figure 5: Front Panel I/O on page 9).
4.2 Mounting the ROSCube Pico
Attach the 2 included wall-mount brackets to the chassis as shown below.
Mount the device to a wall using the keyhole openings indicated or mounting holes, according to the spacing
dimensions of the holes in the bracket as shown below.
All dimensions shown in millimeters
75
10
0
5
161.60
180
90
4.5
0x
4p
cs
R4
R2.6
0
R5
R2.60
20
45
80.80
70
P P